e2v ELIIXA+ 8k/4k CL, Руководство пользователя

Страница: 25 / 56

® 8k/4k CL Color
25
e2v semiconductors SAS 2014

Device Temperature (
DeviceTemperature
) : Get Main Board Temperature

Read function : “r temp”;
Return by the camera : Temperature in Q10.2 format (8 bits 2 bits below comma). Value is between -512 to
511 in °C.

Device Serial Port Selection : Indicates the Serial Port on which the Camera is connected.

Device Serial Port Baud Rate (
ComBaudRate
): Set the Camera BaudRate
 Read function : “r baud”;
Returned by the camera : Value of the Baud Rate

Write function : “w baud” <index> with the index as follows :
 1 : 9600 Bauds (default value at power up)

2 : 19200Bauds

6 : 57600Bauds
 12 : 115200Bauds

Standby Mode (
Standby
) : Activation of the Standby mode of the Camera
 Read function : “r stby”;
Returned by the camera : Boolean.
 0 : Disable Standby mode (False)

1 : Enable stanby mode (True)

Write function : “w stby <val>”; <val> is 0 or 1.

A standby mode, what for ?
The Standby mode stops all activity on the
sensor level. The power dissipation drops down
to about 6W. During the standby mode, the grab
is stopped
Once the Standby mode turned off, the Camera
recovers in less than 1ms to send images again
from the sensor.

Camera status : Get the Camera status register (32bits Integer)

Read function : “r stat”;
Returned by the camera : 32bits integer :

Bit 0 : (
StatusWaitForTrigger
) : True if no trig received from more than 1sec

Bit 1 : ( StatusTriggerTooFast ) : Missing triggers. Trig signal too fast
 Bit 2 : (
StatusSensorConnection
) : True is the Sensor pattern is checked as failed.

Bit 3, 4, 5, 6, 7 : Reserved

Bit 8 : ( StatusWarningOverflow ) : True is an overflow occurs during FFC or Tap balance processing.
 Bit 9 : (
StatusWarningUnderflow
) : True is an underflow occurs during FFC or Tap balance processing
 Bits 10 : Reserved

Bits 11 : Scrolling Direction : 0 = Forward, 1 = Reverse. Updated only by external CC3 (CameraLink)
 Bits, 12, 13, 14, 15 : Reserved
 Bit 16 : (
StatusErrorHardware
) : True if hardware error detected

Bits 17 to 31 : Reserved
Internal Temperature
25
30
35
40
45
50
55
60
65
70
75
0 5 7
10 20 30 40 50 60 70 80 90 10
0
11
0
12
0
13
0
14
0
Time (mn)
°C
Standby Off
Standby On