Display Functions
Speedometer, power indicator, error code indicator, on/off -button for light, cruise control, gear
switch
, and
gear indicator.
Error codes:
E-1 -
Motherboard/Display
– Check connections between display and motherboard
E-2 -
Motherboard/Motor
– Check connections between motherboard and motor (coloured cables)
E-3 -
Brake handle
– Brake handle must be replaced
E-4 -
Motherboard
– Fault on the motherboard
E-5 -
Battery
– Battery must be charged or replaced
E-7 -
Gas accelerator
– Gas accelerator must be replaced
E-8 -
Motherboard/Motor
– Check connections between motherboard and motor (white plug)
Speedometer
Unit: KM/H
Speed signals comes from the motor via the controller to the display.
The indicated speed depends on the motor signal and the wheel diameter.
Display -
power button
•
Hold down the power button (long press) to turn the scooter on and off.
•
To turn on the lights the scooter must be turned on, and the power button must be short pressed once.
•
To alternate between different modes, short press the power button twice (quickly).
3.2
Display & Error Codes
EN
