DISASSEMBLING THE SECONDARY SHEAVE
1. Remove:
clutch carrier nut
TIP
Install the clutch spring holder
and clutch
spring holder arm
onto the secondary sheave
as shown. Then, compress the spring, and re-
move the clutch carrier nut
.
CHECKING THE CLUTCH SHOE
1. Measure:
Clutch shoe
Scratches
3
Glaze using coarse sand-
paper.
Damage/wear Replace
Clutch shoe thickness
4.0 mm (0.1575 in)
<Limit>: 2.0 mm (0.079 in)
TIP
Inspect clutch shoes
.
After removing the clutch weight spring, do
not use them again.
Replace the all three as a set.
3. Remove:
secondary sheave assembly
V-belt
TIP
Remove the V-belt and clutch assembly from the
primary sheave side.
2
2
3
2
1
1
1
a
a
a
a
1
2
1
ENG
4 - 37
BELT DRIVE
