manualshive.com logo in svg

E-ride Industries 2009 EXV2, Руководство пользователя

Поделиться
Скачать
E-ride Industries 2009 EXV2 Скачать руководство пользователя страница 85

 

 

e-ride Industries 

 

Page 83  

 

vehicle needing repair under warranty or any transportation associated with the service 
call such as repair persons transportation to and from the vehicle to repair the vehicle.  
 
 
Shipment of parts under warranty 
 

In the event that a vehicle requires a part for a warranty repair e-ride will ship 

parts free of charge. Parts will be shipped second day air if the vehicle is unable to drive 
according to the sole discretion of e-ride and the parts do not exceed 20 lbs. All other 
parts will be shipped regular ground. In the event that you need your parts sooner the 
owner of the vehicle will be billed the difference in shipping costs from what e-ride pays.  
 
Disclaimer 
 

This limited warranty is exclusive, e-ride Industries makes no other warranty of 

any kind, expressed or implied. Any implied warranties of merchantability or fitness for a 

Содержание 2009 EXV2











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды