manualshive.com logo in svg

E-ride Industries 2009 EXV2, Руководство пользователя

Поделиться
Скачать
E-ride Industries 2009 EXV2 Скачать руководство пользователя страница 50

 

 

e-ride Industries 

 

Page 48  

 

new batteries will also minimize the chance of cell reversal.  Charge the batteries to their 
full state every two months whether you have used them or not to ensure they will not 
fully discharge.

 

 

Do not leave the charger connected while unattended for more than two consecutive 
days.  Severe overcharging and possible damage to the batteries will result if the 
charger should fail to turn off.  

 

5.4.4  Storage 

Do not park the vehicle and leave it for any length of time with discharged 

batteries.  

The batteries could discharge to the point where damage could occur and the 

battery charger will not charge.

   

If you allow the vehicle to sit in conditions of 0 degrees C (32 degrees F) or less 

with a state of charge of 20% or less,

 the battery could freeze.  

If the batteries happen to 

Содержание 2009 EXV2











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды