manualshive.com logo in svg

E-ride Industries 2009 EXV2, Руководство пользователя

Поделиться
Скачать
E-ride Industries 2009 EXV2 Скачать руководство пользователя страница 47

 

 

e-ride Industries 

 

Page 45  

 

b.

 

If either end of your charger plug becomes damaged in any way, make sure to 
replace it IMMEDIATELY. 

c.

 

Use of an attachment not recommended or sold by the battery charger 
manufacturer may result in the risk of fire, electrical shock, or injury to persons.

 

d.

 

Do not operate the charger if it has received a sharp blow, been dropped, or 
otherwise damaged in any way; take it to a qualified service center.

 

e.

 

To reduce the risk of electrical shock, unplug the charger from a live outlet or 
disconnect AC power to the outlet before attempting any maintenance or cleaning. 
Turning off controls will not reduce the risk of electric shock. 

f.

 

DO NOT use jumper cables to the batteries on this vehicle.   

g.

 

Only charge this vehicle with the appropriate battery charger that is supplied with 
the vehicle. 

 
 

Содержание 2009 EXV2











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды