10
Troubleshooting
Question
Possible reasons
Solutions
The camcorder is suddenly
turned off
Auto Off Function is On.
Low battery
Turn recorder on again
Charge battery
Captured images are not
saved into memory
Power goes off before the
images are saved.
Charge battery
Memory card cannot be
Memory card is protected.
Memory card contains non
DCF images from other
cameras.
Unlock the memory card and format it
(in the recorder)
Note: Before formatting, make sure to
backup any files on the card first.
used
All the buttons are invalid.
Short-circuit when connecting
camcorder to other equipment.
Long press the power button
Complete lock-up, usually
during boot at the welcome
screen, with a continuous
warbling tone and
and all buttons invalid
Software has locked up and is
looping
Hold down the On/Off button for 10
seconds.
If this fails to reset:
Disconnect from any external power and
when the internal battery runs down
everything will reset (about 15 minutes)
NOTE: Alterations reserved.
About the Manual
We have tried our best to make sure that what in this manual is correct and up to date. However, we
cannot guarantee that there are no errors, or omissions. If there is a difference between the manual and
recorder, please take the recorder as standard.
We reserve the right to change content or technical regulations without informing you beforehand. In
addition, the manufacturer reserves the right to change technical specification without informing you
beforehand.
If the accessories are different from the ones inside the actual product, please take the actual product as
standard
