Xtreme Lead-1 Operation Manual
29
Setup
Instant Gratification
þ
To Latch BEATS Triggers
The Trigger Keys can be
Latched
so that pressing once turns a key on and
pressing the key again turns it off.
1.
Press the Arp/Beats button and turn the Data Entry control until the
following screen appears (this is the 3rd screen from the beginning).
2.
Press either cursor button repeatedly until it is underneath the Part
field.
3.
Rotate the Data Entry Control to select the desired part.
4.
Press either cursor button repeatedly until it is underneath the unlatch/
latch field.
5.
Rotate the Data Entry Control to change the status to “Latch”.
6.
Repeat steps 2-5 until Parts 1-16 are latched.
7.
Now play the Trigger Keys and hear the results.
8.
Press the
Clear
Trigger Key to kill all latched Parts.
9.
Start up a few more triggers and play with the
Mute
key.
þ
To play BEATS on a different MIDI channel
You can have your cake and eat it too.
1.
Press the Arp/Beats button and locate the screen shown above (the 2nd
screen from the beginning).
1.
Set your MIDI keyboard to transmit on channel
2
.
2.
Select any “bts:” preset on channel
1
(main screen)
.
3.
From the main screen, change to channel
2
and select another preset.
4.
The Trigger Keys now play BEATS and the other keys play the preset on
channel
2
Want more?
5.
On channel 2, select a preset with the
arp:
prefix.
6.
Set the arpeggiator to
P
(A:P) on the main screen (channel 2).
7.
Now you can play BEATS
and
arpeggiate. Yeow!
BEATS TRIGGER LAYOUT
Part 1 Key: C1 unlatch
BEATS MODE Status: P
BtsCh: 01 TrigCh:Basic