E-Mediavision X-View XV-RGB-E1, Руководство пользователя

Страница: 30 / 70

28
Installing Multiple Cards
Multiple cards can be installed in a system providing a large number of capture channels. Combinations of
XV- capture cards in the same machine are supported by the driver.
In order to control the order in which the driver uses the cards, it is recommended when installing multiple
cards that the J6 links on the XV-RGB-X2 are configured. The illustration below shows the jumper link
settings for up to 32 cards in a single system. When two cards have the same link settings, their order is
determined by the PCI bus:
Indicates link fitted
Indicates Link not fitted
DirectShow
If you change the link ordering after installation you must run dplinks.exe. This program will update the
existing input names used by the windows DirectShow interface.
To run the dplinks program open the Run by clicking on Start/Run and type dplinks and then press Enter.
The program will run, however no notifications are displayed.