E-Mediavision X-View XV-RGB-E1, Руководство пользователя

Страница: 64 / 70

62
Connections
The XV-DVI-DL has one DVI Dual-Link connector.
The card is connected to the source using a DVI Dual-Link Cable (not supplied).
Installing Multiple Cards
Multiple cards can be installed in a system providing a large number of DVI Dual-Link capture channels.
Combinations of XV- capture cards in the same machine are supported by the driver.
To control the order in which the driver uses the cards, it is recommended when installing
multiple cards that the J6 links on the XV-DVI-DL are configured. The illustration below shows the
jumper link settings for up to 32 cards in a single system. When two cards share the same link settings,
their order is determined by the PCI bus.
DirectShow
Indicates link fitted
Indicates Link not fitted
If you change the link ordering after installation you must run dplinks.exe. This program will update the
existing input names used by the windows DirectShow interface.
To run the dplinks program open the Run by clicking on Start/Run and type dplinks and then press Enter.
The program will run, however no notifications are displayed.