E-LOK 8 Series, Руководство пользователя

Страница: 11 / 40

Step 1.
If you are retrofitting into an existing mortice
hole, this step may not be required. If you
are fitting the 8-Series into a new hole,
take the including mortice template and cut
the holes into your door. Your E-LOK 8-
Series comes with screws to both suit
wooden and aluminium doors.
Step 2.
On the door face, you'll be required to make
holes to suit the top screw, spindle and
bottom screw of the E-LOK Lockset. Note
the top fixing screw is adjustable, please cut
to actual screw position.
Step 3.
Install the mortice lock into the door.
Ensure fixings are tight and straight.
Step 4.
Install the spindle into the outdoor handle.
Ensure that before you install, check the
clutch arrow is pointing down. Use the
included split pin to secure spindle in
place.
Installation:
10
8 - S e r i e s