H980 Series 3G Router User Manual
18
adopted for some operating conditions, so you may place a lightning
protection device between the connector and the antenna.
Attention:
1.
The products shall be far away from any heating device;
2.
Don’t place the products in the dusty or wet environment;
3.
The products shall be far away from some potential interference sources, like the metal wall, and
micro-wave oven, etc;
4.
Pay attention to the position and angle of antenna to ensure it works well. Don’t place the
antenna in the shielding metal box.
3.2.3 Network configuration
After the configuration environment is connected well as one of the connection
methods, the local configuration computer IP address and other parameters should be
set. Take the LAN connection method as an example to describe the network
configuration procedure shown as below.
1.
Configuration computer setting
First, enter the computer control panel of the selected computer, find “Network
Connections” icon and double click it to enter, select “Local Area Connection”
corresponding to the network card on this page. Refer to the figure below.
Fig. 3.2.3-1: Computer Local Connection Configuration
Enter (double click or right click) the “Local Area Connection”
Æ
“Property (R)” and enter
the interface shown in the figure below:
