H980 Series 3G Router User Manual
10
The indicators on the front panel are described as the table below:
Indicator State Description
LAN:
It lights shows there is a LAN connect, flash shows
it has data communication.
NET:
Indicate the status of module.
SYSTEM:
It lights when router works normally.
Back panel interface
H980 Series 3G Router’s all interfaces are designed on the back panel as shown below:
3G ANT DEF LAN WAN CONSOLE USB POWER Wi-Fi ANT
Fig. 2.1.1-2: Back Panel
The interfaces on the back panel are described as below:
3G ANT:
Antenna (SMA negative terminal) interface, which is able to match with
standard short antenna, vehicular antenna or directional antenna;
DEF:
Reset button used for restoring the default parameters.
LAN:
10/100BaseT self-adapting Ethernet interface;
WAN:
used to connect wired network like ADSL modem.
CONSOLE:
Serial interface used for repair the device.
USB:
used for write ESN and other info into the router so it could support NON-RUIM.
POWER:
DC power supply interface. (Be sure to check if the voltage of power supply is
consistent with the label on the router)
WIFI ANT:
Antenna (SMA negative terminal) interface, which is able to match with
standard short antenna, vehicular antenna or directional antenna;
