H685 User Manual
E
‐
Lins
Technology
Co.,Limited
Tel:
+86
‐
755
‐
29230581
E
‐
mail:
sales@e
‐
lins.com
www.szelins.com
www.e
‐
lins.com
Mode
: Main/Aggressive. The Aggressive mode is commonly used.
Remote Gateway
: This choice just appears in the Client mode and it is used to fill the IP
address in the Server.
Local IP address
: Fill LAN IP of this device. You can fill an IP or a network segment.
Remote IP address
: Fill the IP of the other router.
Authentication
: Commonly, Pre-Shared Key is chosen. And the Client and Server
must choose the same key.
Advanced AKE settings:
There are some encryption methods in this field. You must
use the settings in this field when VPN tunnel needs to be built between H685 and other
brand VPN server.
Example: Connected cisco 7200 and H685
How to config H685 as VPN clinet
IPsec Name: make sure the name in client and server are same, we suggest to use
domain name(111.vpn1.com). if you want to build a point-to-point channel, the IPsec
name have to be written as DEV+equipment
ID+name(DEV281250D52F2A1452.vpn1.com), and make sure both the client and
server are inputing Client equipment ID. You can find H685’s ID in the Status interface.
