C100 Series IP Camera User Manual
E-Lins Technology Co.,Limited
Tel: +86-755-83700465 E-mail: [email protected] www.szelins.com
If the internet cable power connect is correct, it appears device styles,
name, and IP address in the device list, (if it doesn’t appear, please confirm
power & internet cable work normally).
As the interface, left side is the current computer configuration information;
right side is the selected device network configuration information. Default IP
camera address is 192.168.1.126, HTTP interface is 80.
Note:
1. Device information indicates IP camera information.
2. When current computer is the stable IP, (none DHCP IP), the first time use
IP Camera, you could click auto set, to sync local Information to the IP
camera IP address, gateway and DNS
3.If it needs manual modify camera name, HTTP interface, IP address, sub-net
mask, gateway, main DNS server, backup DNS server, etc. please click
apply after modification, enter IP camera username and password, click
confirm is OK.
4. Inner visit address is LAN visit address; outer visit address is WAN visit
address.
5. When IP camera connects to outer net by the first way, before outer net visit
IP camera, port forwarding
is necessary
in the senior router: analog server set.
e.g., IP address of one device in the LAN: 192.168.1.126, port is 80, so it’s
necessary to open IP: 192.168.1.126 port 80(TCP) in router, besides, in the
same LAN, different camera should come with different port, to make sure
there is no port interference in LAN;
6. As port forwarding in the router, please refers to other chapter in router port
