E-line CJ-HDR104 Скачать руководство пользователя страница 21

Страница: 21 / 164

Overview of Navigation and Controls

4.1

Boot up and Shutdown

4.1.1 Boot up

Before the boot up, please make sure:



The rated input voltage matches the device power on-off button. Please make sure the power wire

connection is OK. Then click the power on-off button.



Always use the stable current, if necessary UPS is a best alternative measure.

Please follow the steps listed below to boot up the device.



Connect the device to the monitor and then connect a mouse.



Connect power cable.



Click the power button at the front or rear panel and then boot up the device. After device booted up,

the system is in multiple-channel display mode by default.

Note

After start up, there is black blank screen for awhile. This is due to HDD file scanning function while

monitor search for display source. After file scanning is done, information of "System is initializing,

please wait..." will display.

4.1.2 Shutdown

Note



en you see corresponding dialogue box “System is shutting down…” Do not click power on-off

button directly.



Do not unplug the power cable or click power on-off button to shutdown device directly when device

is running (especially when it is recording.)

There are three ways for you to log out.



Main menu (

RECOMMENDED

): From Main Menu -> Operation -> Shutdown, select Shut Down

button. Click OK button, you can see device shuts down.



From power on-off button on the front panel. Press the power on-off button on the DVR front

panel for more than 3 seconds to shutdown the device.



From power on-off button on the rear panel.

4.1.3 Auto Resume after Power Failure

The system can automatically backup video and resume previous working status after power failure.

4.1.4 Replace Button Battery

Please make sure to use the same battery model if possible.

We recommend replace battery regularly (such as one-year) to guarantee system time accuracy.

Note:

Before replacement, please save the system setup, otherwise, you may lose the data

completely!

Содержание CJ-HDR104





































































































































































Результаты поиска

Содержание CJ-HDR104

Отзывы:

Похожие инструкции для CJ-HDR104

Бренды по названию

Популярные бренды

E-line CJ-HDR104, Руководство пользователя

Результаты поиска

Содержание CJ-HDR104

Отзывы:

Похожие инструкции для CJ-HDR104

Бренды по названию

Популярные бренды