e-Joe EPIK SWAN, Руководство пользователя

Страница: 8 / 21

3
STEP 4: FINAL PRE-RIDE CHECK
•
Check all nuts and bolts and make sure they are properly tightened, paying particular attention to the front wheel
axle nuts, rear wheel axle nuts, kickstand, yoke, and steering head bearings.
•
Check the folding lever for the frame (see page 11 for more details).
•
Check the folding lever for the handlebar pipe.
•
Test the brakes.
•
The battery is pre-installed inside the frame. Make sure it is properly locked in the frame. Lock it with a provided key
— place keys in a safe spot.
• Turn on the LCD Display on the handlebar as per instructions on pages 3-5. Make sure the battery is fully charged,
wear a helmet and… continue reading this manual thoroughly, paying particular attention to the safety warnings
before you start riding your bicycle.
For your safety you need to understand how things work on your bicycle and make certain, all parts are correctly assembled.
We urge you to consult your dealer before the first use and have your dealer check your work before you ride the bike. If you
have even the slightest doubt about your knowledge or bike’s assembly, talk to your dealer.
LCD
EPIK SWAN comes with the multifunctional LCD power assist display. The display is mounted on the left side of the
handlebar and has three main buttons (SW/UP/DOWN), and a monitor.
ON/OFF
By clicking on the SW button for a couple of seconds, the display turns on and activates the power supply. To turn off the
display and deactivate power supply to the bike, long press SW button down. When the bike is not in operation, and no
buttons are pressed for 5 minutes, the display will automatically turn off.
DISPLAY CONTENT
Various display content can be accessed by switching between 3 interfaces (see below). To switch from interface 1 to 2,
click the SW button once. Repeat the action to switch from interface 2 to 3, or to return from interface 3 to 1. In each
interface, if you long press SW button, the LCD and overall power to the bike turn off.