e-Joe ANGGUN, Руководство пользователя

Страница: 9 / 21

9
applying the brake you need to readjust by increasing or decreasing the clearance between the brake pads
and the wheel.
General Operating Instructions
Before You Ride for the First Time:

Check that the handlebar and handlebar stem are properly tightened

Check all other nuts and bolts and fixings are properly tightened, paying particular attention to the
motor fixings, kick stand, yoke, and steering head bearings

Check that brakes and brake levers are functioning properly

Check that tire pressures are 60 psi/4.1 bar and that tires are not damaged
 Check that reflectors and lights are functioning properly
 Make sure battery is fully charged

Load battery into bicycle and turn on by switching the plugged in key to the right side (IGNITION mode)

To turn ON the e-bike, press and hold the POWER button (on the left hand side of the handlebar) for 3
seconds. The LCD display on the center of the handlebar should lighted up and you should see the all
the display there (battery level, PAS level, speedometer, and trip meter)
Electric Assist - LCD Operating Instructions
When you first turn on your electric bike, your LCD Electric Assist Display will automatically go into the default
setting: Pedal Assist System will be turned on and battery level indicator will be turned on.

[ + ] and [ - ] Buttons on the Left Hand side of the handlebar:
o
When pressing the either [ + ] or [ - ] button once, the PAS level will be adjusted as shown on
the LCD display. The highest level is [ 3 ] with the [ + ] button. To get to the hidden turbo mode,
[ 4 ], the user needs to press the POWER button once.
o
When pressing [ - ] button repeatedly, the PAS level will go down to the lowest possible [ 0 ]
meaning that the bike will not assist the rider during pedaling.
o
Throttle mode is independent on this bike since there is a RED push button on the right side of
the handlebar. When the button is pushed in, this means that the THROTTLE mode is activated
(ON). When the red button is pushed out, then the THROTTLE mode will not be active (OFF).

User can either have PAS mode only (THROTTLE mode OFF), THROTTLE mode only (PAS mode OFF), or
both THROTTLE and PAS mode active.

To turn off all electric assist, hold the POWER button down for 3 seconds, or until all LCD display lights
are off. For your safety, please turn off the power key on the battery when bike in not in operation.
During and after Riding: Instructions and Tips