9
IV – Menus
Alarms
Select respectively
ON
or
OFF
with
and
in order to enable or disable the alarm. Choose your
setpoint : CO Limit 1 (first CO setpoint), CO Limit 2 (second CO setpoint), low temperature setpoint
and high temperature setpoint. Confirm with
OK
or
.
Select thresholds
with
OK
or
to enter CO and temperature setpoints. Select + or – signs with
and
then pass on the first digit with
. Low and high
thresholds
entered, confirm with
OK
.
Recording
Select dataset
Enter name
Manual dataset
Configuration
If you use thermocouple probes, you must enter type into the Configuration sub-function.
Configuration sub-function allows to:
•
Select thermocouple
Click on
OK
or
to enter into sub function : a list of thermocouple available ( K, J or T type) appears.
Select type with
and
. Confirm with
OK
.
•
Select display
Click on
OK
or
to enter into sub function. Select channel required with arrow keys
and
and confirm with
OK
. Select respectively
ON
or
OFF
with
and
in order to enable or disable this function. Confirm with
OK
.
•
Select units
Click on
OK
or
to enter into sub function : a list of units available appears. For each channel, select unit required with
and
.
Confirm with
OK
.
Click on
Esc
to return to previous screen.
Delta T
When two PT100 probes or 2 thermocouple temperature probes are connected, AQ200
can calculate Delta temperature value : the
temperature difference between
C2
and
C1
, or
T2
and
T1
, or
T4
and
T3
.
Select
Delta T
in order to view the temperature difference.
If you select
Delta T
again, Delta T function is disabled.
A
manual dataset
is composed of measuring points selected by the operator.
a
. Click on
OK
or
to enter into sub function.
b
. Select
Manual
with
and
. Confirm wih
OK
.
c
. Select
Name
with
and
. Confirm wih
OK
or
. Enter dataset name with arrow keys
and
e
. Confirm wih
OK
.
d.
For measurement launching, click on
OK
with the access key. The number of points selected and the
parameter are displayed.
e.
To save your dataset click on
Save
with the access key.
1.1 Manual dataset
The Recording menu allows a measurement dataset. You can choose between a planned or a continuous dataset.
Memory capacity of the instrument is up to
8,000
points or
50
datasets.
A continuous dataset can be carried out using AQ200 and is composed of several dated measuring points. The
operator can choose an automatic or a manual dataset, with an instant value or an average. This datasets can't be set
using Datalogger-10 Software.
1. Create or launch a continuous dataset
Содержание AQ 200
Страница 1: ...AQ 200 AQ 200 Air Quality...
Страница 4: ...5 Description II Introduction...
