E Instruments AQ 200, Инструкция по эксплуатации

Страница: 5 / 11

6
Interchangeable measurement modules
1. Current / voltage module
Interchangeable modules with Smart-plus system are automatically recognized when connected to the instrument.
It allows current or voltage measurements on V/A1 or VA/2
channels with current/voltage input cables or ammeter clamps.
2. Thermocouple module
It allows thermocouple temperature measurement on Tc1,
Tc2, Tc3 and Tc4 channels with type K, J or T with wire
thermocouple probes equiped with a miniature male
connector.
Wire probes with Smart plus system
Wire probes with Smart-plus system are automatically recognized when connected to
the instrument.
Mini-Din C1
connector
Mini-Din C2
connector
Probes are connected on
min-DIN connectors
C1 and /
or C2
Wireless probe/instrument communication
Wireless communication between probe and instrument with automatic recognition after power-up.
Secured Mini-Din Connector
Connections
II – Introduction
3. Climatic conditions module
It allows hygrometry measurement on Hygro channel, ambient
temperature measurement on Ptx channel and air pressure on
PATM channel.
Pt100 Temperature
CO / Temperature
CO
2
/ Temperature
CO
2
/ Temperature / Hygrometry
Pt100 probes are displayed on Tr1 or Tr2 channels followed by wireless communication
Wireless probes shall be located near the instrument for initial recognition. Connection between AQ200
and wireless probes must be established. See submenu ''Wireless probes'' p 8.