
2: Getting Started
EVO User Manual
31
©2018 E.I. Medical Imaging
About the Battery
The Ibex family of ultrasound scanners can only be charged using the AC adapter supplied by E.I. Medical Imaging.
The system has been shipped to you with a partially charged battery. Once you have received and opened the
equipment, it is recommended you completely charge the battery prior to use. Follow the procedure below for
charging the battery.
Note
– Battery runtime varies depending on your system configuration and headset.
Charging the Battery
To charge the battery:
1. Ensure that the battery is installed in the system. (If it is not already installed, see the instructions for
installing the battery). Slide the latch to the lock position to ensure the system access door is properly
sealed.
2. Connect the AC adapter to the EVO system by aligning the red dot on the connector.
3. Plug the adapter into a 100-240 VAC Outlet.
During the charge cycle the yellow light illuminates indicating the charging process is underway. As the battery
reaches its full charge, the light switches off which indicates the battery is at full charge.
The total charge time will range between 120 and 180 minutes from a totally drained battery to a fully charged
battery.
Note: The AC adapter should not be used during outdoor operation.