E.H. Wachs EP 424, Руководство пользователя

Страница: 76 / 130

EP 424 End Prep Machine
70 Part No. 81-MAN-00, Rev. C E.H. Wachs
9.
Using a 5/16” hex wrench, tighten the 6 captivated screws in the single-point slide to secure
it to the main shaft.
Figure 5-57. Tighten the captivated screws in the 6 holes to attach the single-point slide to
the main shaft.
10.
If you want to install the mandrel before mounting the machine on the workpiece, insert the
threaded end of the mandrel through the single-point slide. You may have to turn the mandrel
slightly while pushing it to engage the spline.
Figure 5-58. Insert the mandrel through the single-point slide.
11.
Turn the feed handle clockwise to engage the threads of the mandrel into the feed nut. Turn
the handle until the threads emerge through the back of the rear feed assembly.