27
E-flite T-34 Mentor ARF Assembly Manual
Positioning the Flaps
Required Parts
Wing assembly
Initial Training Flap Settings
1. Setting the linkage to the third hole back from the
front of the stay sets the flaps to the position for initial
flight training. This will allow the plane to fly at its slowest
speed and will be slowest during landing as well. The
setting for the flaps in this position is 1/2-inch (13mm)
when measured from the trailing edge of the wing to the
trailing edge of the flap.
Intermediate Setting
2. As you continue to advance, the flap linkage can
again be moved forward one hole. The measurement
for the flaps in this setting is 1/4-inch (6mm) from the
trailing edge of the wing to the trailing edge of the flaps.
As described in Step 1, this will allow the aircraft to
fly slightly faster, but will also require a slightly faster
landing speed.
