16
E-flite T-34 Mentor ARF Assembly Manual
3. Plug the motor battery into the speed control.
Set the throttle stick to low throttle and turn on the
speed control. You will hear a series of beeps or tones
when you plug the battery in. During this process it is
normal for the prop to pulse slightly as the ESC powers
up. Please ensure you are not in line with the prop or in
front of it during power up.
Important
: Always use extreme caution around the
propeller when the motor battery is plugged in. A
spinning propeller can cause serious damage or injury.
It is always best to stay behind the propeller and keep
it away from loose objects when the battery and speed
control are connected.
4. Your transmitter should still be on and the battery
plugged in. Now turn the switch on inside the model. The
radio in the model should link up within 10 seconds. If it
does not, turn the switch off and the transmitter off. Then
turn the transmitter on and the switch inside the model on
again and see if the radio links up. If the radio does not
link up at this time, you will need to rebind the system.
This is accomplished in the radio manual that is included
with your system.
