14
E-flite Sukhoi SU-26m 480 ARF Assembly Manual
8. Slide the elevator into position, then the stabilizer.
9. Check the alignment and make sure everything
lines up. Wick thin CA into the joint between the
fuselage and stabilizer. Make sure to glue both top
and bottom. Do not use accelerator—to allow the CA
to wick in the joint, providing the best bond possible.
10. Slide six hinges into the slits in the elevator. Place
a T-pin in each hinge to prevent it from being pushed
into the elevator when attaching it to the stabilizer.
Slide the elevator tight against the stabilizer.