E-FLITE Stearman PT-17 15e ARF, Инструкция по сборке

Страница: 3 / 32

Recommended Radio Equipment
You will need a minimum of a 4-channel transmitter,
receiver and four servos. You can choose to purchase a
complete radio system, or if you are using an existing
transmitter, just purchase the other required equipment
separately. We recommend the crystal-free, interference-
free Spektrum™ DX5e 2.4GHz DSM® 5-channel system.
If using your own transmitter, we recommend the JR
SPORT MN48 and MC35 servos.
If you own a Spektrum radio, just add a DSM2™
receiver, two JR SPORT MN48, and two JR SPORT
MC35 servos. We show the installation of the AR500
receiver in this manual.
Radio System
SPM5500 DX5e DSM2 5CH system
Or Purchase Separately
any of the Following Receivers
SPMAR500 AR500 DSM2 5-Channel Full-Range
Receiver (for DX5e, DX6i, or DX7)
SPMAR6200 AR6200 DSM2 6-Channel Full Range
Receiver (for DX5e, DX6i, or DX7)
And
JSP20040 MN48 Mini Servo (2)
JSP20030 MC35 Micro Servo (2)
JRPA096 9-inch Servo Extension (2)
Recommended Equipment
EFLM4015A Power 15 Brushless Outrunner 950Kv
EFLA1040 40A Pro Brushless ESC
EFLB32003S 3200mAh 3S 11.1V 20C Li-Po
APC12060E Electric Propeller 12 x 6E
Optional Accessories
EFLA110 Power Meter
EFLC3005 Celectra™ 1- to 3-Cell Li-Po Charger
EFLC505 Intelligent 1- to 5-Cell Balancing
Charger
EFLA150 Military Pilot (1 or 2)
Required Tools and Adhesives
Tools & Equipment
Manila card stock Pliers
Low-tack tape Pencil
Pin vise Clear tape
Ruler Hook and loop tape
T-pins Philips screwdriver: #0, #1
Felt-tipped pen Hobby knife (#11 blade)
Mixing sticks Toothpicks
1/16-inch drill bit Sidecutters
Rubbing alcohol Paper towels
Double-sided tape Cable tie
Stick-on lead weight Square
Mixing cups
Allen wrench or balldriver: 3/32-inch, 7/64-inch
Adhesives
Thin CA Medium CA
Threadlock 6-minute epoxy (HAN8000)
Warning
An RC aircraft is not a toy! If misused, it can cause
serious bodily harm and damage to property. Fly only in
open areas, preferably at AMA (Academy of Model
Aeronautics) approved flying sites, following all
instructions included with your radio. Keep loose items
that can get entangled away from the propeller,
including loose clothing, or other objects such as pencils
and screwdrivers. Especially keep your hands away from
the propeller.
Note on Lithium Polymer Batteries
During the course of building your PT-17
ARF we suggest that you use a soft surface
for the building surface. A foam stand, large
piece of bedding foam or a thick bath towel
will work well and help protect the model
from damage during assembly.
Lithium Polymer batteries are
significantly more volatile than
alkaline or Ni-Cd/Ni-MH
batteries used in RC applications.
All manufacturer’s instructions and
warnings must be followed closely.
Mishandling of Li-Po batteries can
result in fire. Always follow the
manufacturer’s instructions when
disposing of Lithium Polymer
batteries.
E-flite Stearman PT-17 15e ARF Assembly Manual
3 3