16
E-flite P-51B Mustang 32e ARF Assembly Manual
11. Insert the brass pushrod connector in the new
hole on the rudder servo horn. Use the nylon
connector backplate and pliers to secure the
connector to the servo horn.
12. Check to make sure the elevator pushrod exits
the fuselage as shown. If not, position the elevator
pushrod as necessary so the threaded ends of the
pushrod are exiting the fuselage.
13. Attach the servo horn to the servo for the
elevator servo using the screw removed in Step 1
and a #1 Phillips screwdriver. The elevator pushrod
is connected to the hole enlarged in Step 9 using a
nylon pushrod connector.
14. Insert the Z-bend of the 22
1
/
2
-inch (572mm)
pushrod in the hole enlarged in the rudder servo
back in Step 10.
