3. Connect the ESC to the motor and secure it
to the inside of the fuselage using hook and
loop material. Actual ESC location may vary.
4. Slide the propeller adapter onto the motor. Place
the propeller onto the adapter, then a spinner
cone onto the adapter and secure.
Note
: It is very important that you check to be
sure the propeller is balanced before installing
onto the shaft. An unbalanced propeller will
cause performance issues. E-flite™ propellers
will need the center hole drilled out to fit the
shaft size of your outrunner. It is very important
the hole is drilled concentric.
15
Содержание Mini Ultra Stick
Страница 1: ...Mini Ultra Stick Assembly Manual...
Страница 20: ...8 Snap the spinner cone onto the spinner backplate 20...