1
E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
4. Repeat Steps 2 and 3 to install the rudder
control horn.
Note
: The rudder horn is opposite the elevator horn.
5. Position the assemble onto the fuselage. Check the
alignment as shown in the drawing. The rudder must
be parallel to the cabane struts. If not, lightly sand the
fuselage where the elevator rests and check the alignment
again. Once the alignment is correct, use foam-safe CA
to glue the assembly to the fuselage.
Rudder parallel to cabanes
