11
E-flite Jenny JN-4 Slow Flyer ARF Assembly Manual
Rudder and Elevator Installation
Required Parts
• Rudder/Fin
• Elevator/Stabilizer
• Micro control horn (2)
• Micro control horn backplate (2)
Required Tools and Adhesives
• Square
• Foam-safe CA
• Sandpaper
1. Position the rudder/fin tab into the slot in the
stabilizer/elevator. The yellow side of the stabilizer/
elevator faces the rudder/fin. Use a square and foam-
safe CA to glue the two items together, making sure the
rudder/fin is square to the stabilizer/elevator.
2. Slide a micro control horn into the slot in the elevator
from the bottom.
3. Slide the micro control horn backplate onto the control
horn from the opposite side of the elevator as the horn.
Apply a few drops of foam-safe CA onto the backplate to
secure it to the horn.
