background image

76

EFL Habu 32x DF

What this Warranty Covers

Horizon Hobby, LLC (“Horizon”) warrants to the original 
purchaser that the product purchased (the “Product”) 
will be free from defects in materials and workmanship 
at the date of purchase. 

What is Not Covered

This warranty is not transferable and does not cover 
(i) cosmetic damage, (ii) damage due to acts of God, 
accident, misuse, abuse, negligence, commercial 
use, or due to improper use, installation, operation or 
maintenance, (iii) modifi cation of or to any part of the 
Product, (iv) attempted service by anyone other than 
a Horizon Hobby authorized service center, (v) Product 
not purchased from an authorized Horizon dealer, or 
(vi) Product not compliant with applicable technical 
regulations. 

OTHER THAN THE EXPRESS WARRANTY ABOVE, 
HORIZON MAKES NO OTHER WARRANTY OR 
REPRESENTATION, AND HEREBY DISCLAIMS ANY AND 
ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT 
LIMITATION, THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. THE PURCHASER 
ACKNOWLEDGES THAT THEY ALONE HAVE 
DETERMINED THAT THE PRODUCT WILL SUITABLY 
MEET THE REQUIREMENTS OF THE PURCHASER’S 
INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and 
exclusive remedy shall be that Horizon will, at its option, 
either (i) service, or (ii) replace, any Product determined 
by Horizon to be defective. Horizon reserves the right 
to inspect any and all Product(s) involved in a warranty 
claim. Service or replacement decisions are at the sole 
discretion of Horizon. Proof of purchase is required 
for all warranty claims. SERVICE OR REPLACEMENT 
AS PROVIDED UNDER THIS WARRANTY IS THE 
PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, 
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL 
LOSS IN ANY WAY, REGARDLESS OF WHETHER 
SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, 
TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER 
THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
Further, in no event shall the liability of Horizon exceed 
the individual price of the Product on which liability is 
asserted. As Horizon has no control over use, setup, 
fi nal assembly, modifi cation or misuse, no liability shall 
be assumed nor accepted for any resulting damage or 
injury. By the act of use, setup or assembly, the user 
accepts all resulting liability. If you as the purchaser or 
user are not prepared to accept the liability associated 
with the use of the Product, purchaser is advised to 
return the Product immediately in new and unused 
condition to the place of purchase.

Law

These terms are governed by Illinois law (without regard 
to confl ict of law principals). This warranty gives you 
specifi c legal rights, and you may also have other rights 
which vary from state to state. Horizon reserves the 
right to change or modify this warranty at any time 
without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot 
provide warranty support or service. Once assembly, 
setup or use of the Product has been started, you must 
contact your local distributor or Horizon directly. This 
will enable Horizon to better answer your questions 
and service you in the event that you may need any 
assistance. For questions or assistance, please visit 
our website at www.horizonhobby.com, submit a 
Product Support Inquiry, or call the toll free telephone 
number referenced in the Warranty and Service Contact 
Information section to speak with a Product Support 
representative.

Inspection or Services

If this Product needs to be inspected or serviced and 
is compliant in the country you live and use the Product 
in, please use the Horizon Online Service Request 
submission process found on our website or call Horizon 
to obtain a Return Merchandise Authorization (RMA) 
number. Pack the Product securely using a shipping 
carton. Please note that original boxes may be included, 
but are not designed to withstand the rigors of shipping 
without additional protection. Ship via a carrier that 
provides tracking and insurance for lost or damaged 
parcels, as Horizon is not responsible for merchandise 
until it arrives and is accepted at our facility. An Online 
Service Request is available at http://www.horizonhobby.
com/content/_service-center_render-service-center. If 
you do not have internet access, please contact Horizon 
Product Support to obtain a RMA number along with 
instructions for submitting your product for service. 
When calling Horizon, you will be asked to provide 
your complete name, street address, email address 
and phone number where you can be reached during 
business hours. When sending product into Horizon, 
please include your RMA number, a list of the included 
items, and a brief summary of the problem. A copy of 
your original sales receipt must be included for warranty 
consideration. Be sure your name, address, and RMA 
number are clearly written on the outside of the shipping 
carton. 

NOTICE: Do not ship Li-Po batteries to 
Horizon. If you have any issue with a Li-Po 
battery, please contact the appropriate 
Horizon Product Support offi ce.

Warranty Requirements 

For Warranty consideration, you must include 
your original sales receipt verifying the proof-
of-purchase date

. Provided warranty conditions have 

been met, your Product will be serviced or replaced free 
of charge. Service or replacement decisions are at the 
sole discretion of Horizon.

Non-Warranty Service

Should your service not be covered by 
warranty, service will be completed and 
payment will be required without notifi cation 
or estimate of the expense unless the expense 
exceeds 50% of the retail purchase cost.

 By 

submitting the item for service you are agreeing to 
payment of the service without notifi cation. Service 
estimates are available upon request. You must include 
this request with your item submitted for service. Non-
warranty service estimates will be billed a minimum of 
½ hour of labor. In addition you will be billed for return 
freight. Horizon accepts money orders and cashier’s 
checks, as well as Visa, MasterCard, American 
Express, and Discover cards. By submitting any item 
to Horizon for service, you are agreeing to Horizon’s 
Terms and Conditions found on our website http://www.
horizonhobby.com/content/_service-center_render-
service-center. 

ATTENTION: Horizon service is limited to 
Product compliant in the country of use 
and ownership. If received, a non-compliant 
Product will not be serviced. Further, the 
sender will be responsible for arranging 
return shipment of the un-serviced Product, 
through a carrier of the sender’s choice and 
at the sender’s expense. Horizon will hold 
non-compliant Product for a period of 60 
days from notifi cation, after which it will be 
discarded.

•LIMITED WARRANTY

Содержание Habu 32x DF





















































































Отзывы: