19
E-flite F-15 Eagle ARF Assembly Manual
1. Use a hobby knife to enlarge the outer hole of a servo
arm. Install the pushrod connector and secure it using the
nylon nut supplied with your model.
2. Install the servo arm on the main gear retract servo.
The servos shown are centered. You will want an equal
amount of throw in both directions from this center
position when operating the retract servos.
3. Use a hobby knife to remove the material from under
the rear wing alignment tab. This will provide the access
necessary to cut the opening for the retract servo in the
side of the fuselage.
