background image

EN

AS3X System

Horizon Hobby has always made RC sport, scale and unique aircraft with the 
kind of performance experts appreciate. First used in Blade

®

 ultra micro fl ybar-

less helicopters, MEMS sensor technology within the Artifi cial Stability 3-axis 
(AS3X) System has been specifi cally tuned for airplanes to help invisibly correct 
for turbulence, torque and tip stalls.

The precision and performance available from AS3X equipped ultra micro 
airplanes has heralded a new era of performance, and with the AR635, that 
performance is introduced for larger airplanes.

The outstanding control agility delivers an ultra smooth, locked-in feel that 
obeys your every command with performance that’s natural feeling. It’s so 
gratifying, in fact, that it’s as though you’re the RC pilot of an expertly tuned, 
giant-scale aircraft. Welcome to AS3X, your parkfl yer will never be the same! To 
see what we mean, go to www.E-fl iteRC.com/AS3X.

The Spektrum AR635 receiver is recommended for ths airplane. If you choose 
to install another receiver, ensure that it is at least a 6-channel full range 
(sport) receiver. Refer to your receiver manual for correct installation and 
operation instructions. 

Installation 

(AR635 shown)

1.   Remove the screw (

A

) and radio hatch (

B

) from the bottom of the fuselage. 

2.   Install your full range (sport) receiver in the fuselage using double-sided 

servo tape. 

3.   Attach the elevator and rudder servo connectors to the appropriate chan-

nels of the receiver.

4.   Attach the aileron Y-harness to the aileron channel of the receiver.

5.   Attach the ESC connector to the throttle channel of the receiver.

A

B

B

Receiver Selection and Installation

4

Содержание Carbon-Z Yak 54 3X
























Отзывы: