PULL DOWN MENUS
4-6
May 2000
Part No. 001-2008-204
4.4.1 WRITE SETUP PARAMETERS
This command sends the contents of a file to the
repeater and programs the EEPROM memory in the
Main Processor Card (MPC).
Figure 4-15 WRITE SETUP PARAMETERS
Figure 4-16 PROGRAM WRITE SETUP
4.4.2 READ SETUP PARAMETERS
This command reads the contents of the
EEPROM memory of a repeater and loads it into a
buffer. The contents of the buffer is then displayed to
show the programming of the repeater.
Figure 4-17 READ SETUP PARAMETERS
Figure 4-18 READING SETUP
4.5 HARDWARE
Figure 4-19 HARDWARE MENU
Program Rptr 1
Ok
Cancel
Programming Setup Parameters
Count = 1
Ok
Cancel
Read Setup Parms?
Reading Setup Parameters
Attempting access to Repeater
Figure 4-14 HARDWARE PROGRAMMING FLOWCHART
Home
UID
GoTo
GID
Data Received From Radio
Data Transmitted to Radio
Home
UID
GID
Pri
Stat
Time
HSDB Monitor
RX/TX Data
HARDWARE
RF Data
RF Line Monitor
Mode Select
Normal
Test
Revisions
Input Monitor
Input Alarm 3/4 Analog Monitor
Repeater (1-20)
