OPERATION
3-26
Revised February 1997
Part No. 001-9750-005
access attempts are then made until the push-to-talk
switch is released and then pressed again.
•
If this tone sounds after the transmitter has been
keyed for an extended time and the transmitter turns
off and “TX TIMEOUT” is displayed, the trans-
mitter has been disabled by the Time-Out Timer
feature (see Section 3.6.1).
•
If this tone sounds as soon as the push-to-talk switch
is pressed with a conventional channel selected and
“TX DIS BSY” is displayed, the channel is busy and
the transmitter was disabled by the Transmit Disable
On Busy feature (see Section 3.9.1). If “TX
DISABLE” is displayed instead, a conventional
receive-only channel is selected (see Section 3.9.6).
•
If the push-to-talk switch is pressed while receiving
an LTR call, this tone sounds and “TX DIS BSY” is
displayed.
Proceed (Clear-To-Talk) Tone -
This is a 20 milli-
second burst of the 700 Hz tone which sounds after the
push-to-talk switch is pressed to indicate when talking
can begin (see Section 3.6.3).
Key Press Tone -
This is a 30 millisecond burst of the
700 Hz tone that sounds to indicate when a key or the
Select switch is pressed or turned.
MULTI-NET SPECIAL CALL TONES
NOTE: The following tones are produced by the Multi-
Net RNT and are heard only when placing special
calls.
Confirmation Tone -
A short tone which sounds
when the number dialed is accepted by the system.
Call Proceed Tone -
With Multi-Net Directed Group
calls, ringing does not occur after the number is dialed.
Instead, this short tone sounds after the confirmation
tone to indicate that the audio path is complete and
speaking can begin.
End Call Tone -
Three beeps which sound when the
end of the call has been detected by the system.
Proceed Dialing Tone -
When placing a landside-
originate call to a mobile, the caller may dial the
number of the system and then when the system
answers, a number specifying the mobile being called.
This tone sounds to indicate when the number of the
mobile should be entered.
LTR TELEPHONE CALL TONES
NOTE: The following tones are produced by the LTR
RIC interconnect equipment and are heard only when
placing LTR telephone calls.
Reorder Tone -
Three beeps which indicate that the
call has been terminated by the system.
Return Time Warning Tone -
Two beeps which warn
that you have not transmitted for an extended period.
If you do not transmit within 5 seconds, the call is
automatically terminated by the system. The time
between transmissions is one of the parameters used
by the system to detect the end of a call when the #
character is not sent.
Conversation Time-Out Tone -
Calls are limited to a
certain length by the system. Thirty seconds before
this time is reached, a “tick” begins sounding each
second. When the 30-second time expires, the call is
automatically terminated by the system.
Turn-Around Tone -
This is a single beep which may
be used to indicate to the landside party when to
respond to your transmission. It sounds when you
release the PTT switch, and you may partially hear this
tone.
Proceed Tone -
This tone consists of two beeps and it
tells the landside caller when to enter the five-digit
number specifying the mobile being called. Dialing of
this number must be started within 5 seconds of
hearing this tone, and a tone-type telephone must be
used.
3.10.2 DISPLAY MESSAGES
The following messages may appear in the ten-
character alphanumeric display.
ALL CALL -
Indicates that the Multi-Net “All Call”
special call is being received. This is a high priority
call to all mobiles assigned to a site. If another call is
being received, it is dropped to receive this call.
Содержание Summit DM 975x
