manualshive.com logo in svg

E.F. Johnson Company Summit DM 975x, Руководство по обслуживанию

У нас есть сервисный мануал для продукта E.F. Johnson Company Summit DM 975x. Вы можете бесплатно скачать его с нашего сайта. Этот мануал поможет вам узнать все технические детали о продукте и разобраться с его использованием. Не забудьте загрузить его с manualshive.com.

Поделиться
Скачать
background image

TRANSCEIVER PROGRAMMING

4-14

Revised December 2000

Part No. 001-9750-007

or have questions about accessing the ACES system, 
call 800-328-3911, extension 7 (USA and Canada) or 
507-835-6222, extension 2100 (international).

4.6.2 PROGRAMMING FILES

The files required to flash program a transceiver 

are contained in a compressed self-extracting file called 
DMFLASH.EXE. This file is located in the 
MNFLASH download area of the ACES system. Once 
this file is downloaded, simply type DMFLASH (Enter) 
at the DOS prompt to extract the following files:

File Name

Description

 

DM_LOAD.EXE

Flash loader program

 READ.ME

Programming 

instructions

 

BOOTLOAD.S19

Flash loader hex file

 

PREBOOT.S19

Flash loader hex file

 

SUMMIT_1.S19

Radio software hex file

 

SUMMIT_2.S19

Radio software hex file

The SUMMIT_x.S19 files contain the actual code 

that is loaded into the transceiver by the program. 
These are the files that are changed when the radio 
operating software is updated.

4.6.3 PROGRAMMING “A” MODEL 

TRANSCEIVERS

NOTE: Before any Summit DM “A” revision letter 
transceiver and also “B” revision letter 9755 trans-
ceivers can be connected to the RPI module, pin 1 of 
power amplifier module U500 must be desoldered and 
lifted from the board.

If this is not done with these transceivers, the 

transmitter may erroneously key when the RPI switch 
is moved to the flash position. This may result in 
excessive current draw that could damage the antenna 
switching circuitry. Diodes CR506 and CR507 and RF 
amplifier Q290 could be destroyed. Fuse F500 may 
also blow if the power supply can produce enough 
current. This problem has been corrected in later 
models, so this modification is not required.

4.6.4 PROGRAMMING PROCEDURE

a. Connect the programming hardware listed in setup 

as described in Section 4.1.1. Only RPI, Part No. 

023-9750-000 or 023-9800-000, can be used (the 
earlier 023-5810-000 model will not work).

NOTE: The RPI must always be connected to the front 
panel jack of the transceiver (it cannot be connected to 
the microphone jack of a remote control unit).

b. Set the switch on the RPI so that it is toward the 

LED.

c. Start the program by typing DM_LOAD (Enter) at 

the DOS prompt. When the opening screen is dis-
played, turn transceiver power on. If power is 
already on, cycle power off and then on. The trans-
ceiver display should be blank and the RPI LED 
should be amber.

d. Highlight the first selection in the loader program's 

menu and then press the Enter key to begin the data 
transfer. Programming requires approximately 90 
seconds.

e. Disconnect the programming cable from the trans-

ceiver and cycle power off and on. Verify that the 
new revision number is displayed momentarily 
when power is turned on (see Section 3.6.14).

4.7 UNIVERSAL INTERFACE PROGRAMMING

4.7.1 INTRODUCTION

The UD

2

I™ (Universal Digital and Data Inter-

face) feature is available on all Summit DM trans-
ceivers that have Version 207 or later operating soft-
ware (see Appendix A). Optional universal interface 
pigtail cable assembly, Part No. 597-2002-245, is 
required to utilize this interface (Validation Key, Part 
No. 250-9750-050, is no longer required). This cable 
provides a female 25-pin D-type connector for inter-
facing with the data equipment. 

This is a non-proprietary interface that can be used 

to connect various types of data equipment such as 
modems and data terminals to the transceiver. A 
detailed description on the operation of this interface is 
located in Appendix B. This information can be used to 
design and set up equipment for use with this interface. 

Various aspects of this interface are program-

mable using the standard transceiver programming 
software (Version 202 or later). The parameters that 

Содержание Summit DM 975x

























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Summit DM 975x

Zartek RX-8 User Manual preview
RX-8
Бренд: Zartek Страницы: 17
Raritan Satellite Radio User Manual preview
Satellite Radio
Бренд: Raritan Страницы: 2
Noxon dRadio 100 Manual preview
dRadio 100
Бренд: Noxon Страницы: 20
E.F. Johnson Viking VM600 Series Operating Manual preview
Viking VM600 Series
Бренд: E.F. Johnson Страницы: 188
Manta CB02 User Manual preview
CB02
Бренд: Manta Страницы: 16
Cellution LinkWiser-S400M Technical Data & Users' Manual preview
LinkWiser-S400M
Бренд: Cellution Страницы: 17
C. Crane CC Solar Observer Instruction Manual preview
CC Solar Observer
Бренд: C. Crane Страницы: 16
kchibo KK-522 Operating Instructions preview
KK-522
Бренд: kchibo Страницы: 2
Cobra HH 50 WX ST Operating Instructions Manual preview
HH 50 WX ST
Бренд: Cobra Страницы: 42
Albrecht Audio 27450 Instruction Manual preview
27450
Бренд: Albrecht Audio Страницы: 104
GPX C208B User Manual preview
C208B
Бренд: GPX Страницы: 2
Radio Shack 21-1672 Owner'S Manual preview
21-1672
Бренд: Radio Shack Страницы: 40
Cambridge SoundWorks SoundWorks Radio 820HD User Manual preview
SoundWorks Radio 820HD
Бренд: Cambridge SoundWorks Страницы: 20
Cobra HE130 User Manual preview
HE130
Бренд: Cobra Страницы: 4
Cobra Cobra Operating Instructions Manual preview
Cobra
Бренд: Cobra Страницы: 30
Alinco DR-03T Service Manual preview
DR-03T
Бренд: Alinco Страницы: 36
Motorola ASTRO APX O5 User Manual preview
ASTRO APX O5
Бренд: Motorola Страницы: 166
Magnetrol Pulsar R86 Operating Manual preview
Pulsar R86
Бренд: Magnetrol Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды