8
User Manual EE260 Heated Humidity and Temperature Probe for Meteorological Applications
4 Installation
4.1 Radiation Shield
With its rotation symmetric design, the EE260 is very well suited for mounting in a radiation shield, thus
protecting the device against rain, snow, ice and solar radiation. The probe is fixed by means of a cable
gland.
Best measurement performance is achieved in the optionally available radiation shield with artificial
ventilation. Please refer to the HA010511 data sheet for more information.
Fig. 3
EE260 mounted within the optional radiation shield HA010511
4.2 Wall Mount/Pole Mount
The probe may be installed on a wall or a pole with the help of the mounting clip HA010227 (not
included in the scope of supply, see data sheet “Accessories”). This also allows a placement in a
Stevenson screen / wheather hut.
Please note:
The probe shall be mounted vertically with the filter cap upside, a proper air circulation around the
probe must be ensured (e.g. with HA010511). Please avoid any improper mechanical stress onto the
probe.
Fig. 4
EE260 mounted with the optional clip HA010227
Avoid unnecessary stress here
60 mm (2.4") clamping zone
