E+E Elektronik EE1900 Скачать руководство пользователя страница 2

E+E Elektronik Ges.m.b.H. does not accept warranty and liability claims neither upon this publication nor in case 

of improper treatment of the described products.
The document may contain technical inaccuracies and typographical errors. The content will be revised on a 

regular basis. These changes will be implemented in later versions. The described products can be improved 

and changed at any time without prior notice.

© Copyright E+E Elektronik Ges.m.b.H. 

All rights reserved.

EMC note USA (FCC):

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when 

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful 

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at his own expense.

EMC note Canada (ICES-003):

CAN ICES-3 (A) / NMB-3 (A)

Содержание EE1900














Отзывы: