Document:
Date
Created By:
DCR#
LPN00320X0001A0_A
2015-12-22
TMT
005842
INSTALLATION INSTRUCTIONS
LED Radial Wall Sconce
E-RS Series
www.e-conolight.com | 888.243.9445 | FAX: 262.504.5409
CAUTION:
Changes or modifications not expressly approved
could void your authority to use this equipment.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
CAN ICES-003 (A)/NMB-003 (A)
FCC NOTICE
5.
Push excess cord through grommet into junction box. See
Figure 4.
6.
Hang the fixture on the mounting plate. Securely attach fixture to
mounting plate by reinserting and tightening the screws removed
in Step 1. See
Figure 5.
FIGURE 4
FIGURE 5
