
[!]
Error
I
Reset Mode
- Error code and error led will be flashing countinusly If the errors cause a lock out condition,
tum
to Status
(Pl) to Reset"
e
"position and hold it for
5
sec. to get to the normal operation (winter or
summer) mode again.
[!]
Monometer
CH operating water pressure can be read on the manometer.
[1]
Timer
(Optional)
The timer provides automatic control of the boiler based on set operating programs.
It
is
possible to
enter
8 programs allocatable over the week.
[!]
Control Panel Cover
Whilst CH, DHW and Status s
are
under its plastic cover, boiler functions and fault/error conditions
can be seen without opening the cover.
: The CH has no effect anymore on the system
if
the system
has
t
e room t1Jermostat and also it
is
active.Additionally,CH should be the maximum position.
•
Operating The Boiler
[]
Start up
I
Shut off the boiler
Turn the Status Pot. desireable position (Winter or Summer) to (fig.21). When the winter
mode is selected,
- After the sequence test
is
completed successfully, LED L3 will turn ON to indicate the stand
by mode ifthere're neither DHW or CH request. lfCH is in winter mode, ignition sequence
will be started automatically to fire the bwner and then CH will be active.
OFF-Reset
*·
9:
MIN.
CD
23