4-
SAFETY RULES AND WARNINGS
4.1- Safety Rules
The power line to which the device is connected must have cross-sectional dimensions as
specified in the manual and grounded. For three-phase operating devices, a three-phase power
supply must be available at the installation location. Leakage current protection relay must be
connected before the device input.
4.2- Installation
•
Electrical, central heating, and hot domestic water installations must be completed before
the assembly of your device.
4.3- Assembly
•
The device must be assembled by an authorized installation agent in accordance with the
standards in the assembly manual.
•
The device must be mounted on a flat, rigid wall that can withstand its weight. The device should
not be mounted so that it is directly exposed to water vapor, detergent vapor, etc.
•
The initial start-up of the device must be performed by the authorized service.
•
Sun exposure can cause discoloration on the outer surface of your device over time.
•
The device should normally be installed indoors. However, it can also be installed within a
suitable cabinet in places such as a garage, open balcony, etc. Consult E.C.A. for appropriate
cabinet size.
•
If the device is located in an unheated location, it should be powered on, switched on, and
within the operating pressure range of installation so that freeze protection would be activated.
The freeze protection remains active even if the device is in OFF (closed) position.
4.4- Commissioning
•
The initial start-up of the device must be performed by the authorized service.
•
Whether the maximum water pressure (bar) for the device and the rated voltage of the power
supply in the information label are compatible with the local supply conditions must be precisely
checked.
•
After the installation and initial start-up operations of the device are completed, ask the
authorized service for information about how to operate the device and the safety devices.
4.5- Operation and Maintenance
•
Observe the warnings in the installation and operation manual. This will prevent any misuse and
associated hazards.
•
Regular annual maintenance is recommended for your device work to operate more efficiently.
Maintenance operations are out of warranty and must be carried out by the E.C.A. authorized
services.
•
The outer surfaces of the device should only be cleaned with a damp cloth without using
detergent or any chemicals. Using chemicals such as detergent, etc. may cause corrosion and
scratches on your device.
INFORMATION
These are descriptions containing information that should be taken
intoconsideration by the user.
CAUTION: Indicates that material damage or slight personal injury may occur.
DANGER: Indicates that severe personal injury may occur.
5
