the display.
port 7 of the onboard computer via a suitable
USB cable to a standard USB charger or the
USB port of a computer (5 V charging voltage,
max. 500 mA charging current). “USB
connected” will appear in text indication d of
the on-board computer.
Switching on/shutting down the on-board
computer
To switch on the on-board computer, briefly
press the On/Off button 5. The on-board
computer can also be switched on when it is
not inserted in the holder (if the internal battery
pack is sufficiently charged).
To switch off the on-board computer, press the
On/Off button 5.
If the on-board computer is not inserted in the
holder, it automatically switches off after
1minute to save energy if no button is pressed.
If you do not use your eBike for several weeks,
remove the on-board computer from its holder.
Store the onboard computer in a dry
environment at room temperature.
Regularly recharge the on-board computer’s
battery pack.
Battery Charge-control Indicator
The battery charge-control indicator i displays
the charge level of the eBike battery pack, not
that of the on-board computer’s internal
battery pack. The charge level of the eBike
battery pack can also be checked on the LEDs
of the battery pack itself.
On indicator i, each bar of the battery pack
symbol is equivalent to a capacity of approx.
20 %
If the on-board computer is removed from the
holder 4, the last displayed battery charge level
is saved.
If an eBike is operated with two battery packs,
the battery charge-control indicator i displays
the level of both battery packs.
Setting the Assistance Level
On the operating unit 9 you can set how much
assistance level can be changed at any time,
even while cycling.
Note: For individual versions, it is possible that
the assistance level is pre-set and cannot be
changed. It is also possible that less
assistance levels are available for selection
than listed here.
The following assistance levels (max.) are
available:
– “OFF”: The motor assistance is switched off,
and the eBike can be moved as a normal
bicycle only by pedalling. The push assistance
cannot be activated in this assistance level.
– “ECO”: Effective assistance at maximum
efficiency for maximum cruising range
– “TOUR”: Uniform assistance, for touring with
long cruising range
– “SPORT”: Powerful assistance for sportive
riding off road as well as for urban traffic
– “TURBO”: Maximum assistance, supporting
highest cadence for sportive riding
To increase the assistance level, press the “+”
12 button on the operating unit until the
desired assistance level appears in
the display b. To decrease the assistance level,
press the button “–” 11.
The requested motor output is displayed in
indicator a. The maximum motor output
depends on the selected assistance level.
When the on-board computer is removed from
the holder 4, the last indicated assistance level
is stored; the motor-output indicator a remains
empty.
Interaction of the eBike System with the
Bicycle Gears
The bicycle gears should be used as with a
normal bicycle, even with eBike motor
assistance (please observe the operating
instructions of your eBike).
Independent of the type of gearing, it is
recommended to briefly interrupt the pedaling
F O R M E B I K E S . C O . U K
20
