Manual for Power Pack compatible for Bosch* Classic (+) drive system
* Bosch is a trademark of the Robert Bosch GmbH
Page
8
of
9
Battery usage
Please consider the safety instruction given earlier during usage of your E-Bike Vision Power
Pack.
Your Power Pack will enter automatically into sleep-mode (if it is not installed in the
eBike) after 3 seconds to prevent itself of self-discharging. Also, it will shut down the
drive system after 10 minutes of no use of the eBike. It is irrelevant whether the lights
are enabled or not!
Take care, that the battery is in it’s correct position, before inserting. If not, you can
damage the battery’s housing.
Before each use of Power Pack, it must be activated by pushing the capacity indicator
button or by pushing the ON / OFF switch of the HMI.
Do not press the capacity indicator button several times in quick succession, this
activates and deactivates the battery once again.
You installed your new E-Bike Vision Power Pack correctly in your eBike and locked it (do
not forget to remove the key)? Then turn on the drive system by the capacity indication
button or via the ON /OFF switch of your HMI. The drive system now read the current
capacity of the battery and will calculate the approximated range, based on your previous
driving profile. The drive system is ready for use as soon as the speed is displayed.
Capacity is indicated during use as folows:
LED 1 flashing:
0
– 5 % charged capacity
LED 1 lighting:
6
– 20 % charged capacity
LED 1 and 2 lighting:
21
– 40 % charged capacity
LED 1,2 and 3 lighting:
41
– 60 % charged capacity
LED 1,2,3 and 4 lighting:
61
– 80 % charged capacity
LED 1,2,3,4 and 5 lighting:
81
– 100 % charged capacity
Do not remove your battery off the eBike, as long as the drive system is on. Turn it off
before!
Your new Power Pack owns the latest and most safely battery management system
technology and protects itself from incorrect operation. Before the cells would be completely
discharged, the battery switches off the motor. However, there will remain enough power
within the battery, to drive safe home with activated lights, if you are powering the lights via
the drive battery.