DYSIS Ultra 2.0 Digital Colposcope Instructions for Use
0330-53095 R4
Revision Date 25-Feb-2021
Page
19
of
61
Additional options are available by selecting the
MENU button in the left upper corner (Fig 13). This
expands a side panel that enables the user to access the SETTINGS and set or change the device accessibility;
PURGE the DYSIS acetic acid applicator; calibrate the system; LOG OUT; SHUT DOWN.
Fig 13: Additional options menu
15.3.
General Navigation Buttons
In some menus, the
button will return the user to the previous screen. Alternatively, in other modes of use,
the
button will offer the option to return to the previous screen after a message has been acknowledged (i.e.
during mapping).
enables returning to the HOME menu, dependent on the mode in use.
takes the user to the settings menu from the HOME menu. It will also allow the user to PURGE the DYSIS
acetic acid applicator, LOGOUT and SHUTDOWN.
A different menu is available from the
button when in examination mode. See Section 16.4.
Will close the menu and/or page in use.
15.4.
Weekly Calibration
The system requires a weekly calibration. A message on the home screen displays when the current calibration
expires. It is not possible to initiate the mapping procedure if the system calibration is not current. See section
19.4 for calibration instructions.
15.5.
Creating a New Patient Record
To create a new patient record on the database (Fig 14), the user must select NEW PATIENT and then use the
touchscreen to enter personal identification information and additional demographic data. The cursor can be
moved to any field by touching inside the text box or pressing the tab key on the keyboard. In addition, NEXT can
be pressed on the touchscreen to move between data sets.
