dyras SHM-282, Инструкция по эксплуатации

Страница: 4 / 35

EN
SHM-282 SHM-282
6
7
other liquids. Do not touch the appliance if it gets wet or is exposed to moisture; unplug
it from the mains socket immediately and take it to an authorised service engineer for
checking or repair.
• Always ensure that the appliance cannot slip from its storage place, or fall into water.
• The mains plug must be always disconnected from the wall socket after use and before cle-
aning. Switch off the hair straighteners before removing the mains plug. Never disconnect
the appliance from the socket by pulling the mains cable; always grip the plug!
• Do not allow any objects to fall into the motor unit ventilation slots. Do not insert anything
into these slots, as this can cause damage, electric shock or a short circuit. Take care to
prevent unwanted solid or hard objects from falling into the mixing bowl as these could
cause accidents or damage the appliance.
• Don’t use the appliance in the presence of explosive or inflammable gases, vapours or
liquids.
Dear Customer,
All electrical and mechanical equipment needs to be cared for appropriately. It’s
important to note that using or storing the appliance in certain conditions may
adversely affect its lifespan and functionality. Always protect the appliance from the
conditions listed below.
Using or storing the appliance in a wet, humid or damp environment can cause:
– deterioration and premature aging of the cover and electric insulation of the
appliance,
– premature wearing and aging of the plastic and rubber components,
– rust and corrosion affecting electrical components and metal parts.
Using the appliance in a dusty environment or in the kitchen (where the air may be
contaminated with vapours from cooking oil or grease) can cause
– greasy dust coatings on the mechanical and electrical elements and the
casing of the appliance, which could result in electrical contact failure or
even complete breakdown, and could also damage the plastic and rubber
elements.
The effects of direct sunlight on the appliance can include:
– accelerated deterioration of the appliance casing and its plastic and rubber
components, damage to strength and other structural features. The applian-
ce’s surface may become porous and fragile, which may result in a safety risk.
Continuous heavy duty use can cause
– premature wear of the structural elements.
Storing the appliance in cold or frosty environment may cause:
– damage to the plastic and rubber components; if they become fragile, this
may result in a safety risk.
– oxidation resulting from condensation, and corrosion of the metal compo-
nents.
Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can
cause:
– damage, deformation, softening or melting of plastic or rubber parts and
casing elements, or deterioration of electrical insulation.
Following the operating instructions and avoiding any of the conditions listed above
will help you increase the lifespan of the appliance. The manufacturer is not res-
ponsible if the appliance is stored inappropriately or contrary to these instructions.
You are recommended to have the appliance serviced regularly by an authorised
engineer to keep it working for as long as possible.
Please respect the environment when the appliance reaches the end of its life.
Electrical products must not be disposed of with other residential waste because they
can damage the natural world and may be hazardous to human health. You should
dispose of the appliance at an appropriate recycling site or by using a collection
service that specialises in electrical appliances.
You may wish to contact the retailer or the manufacturer if you are unable to find
convenient local recycling facilities as they have some legal responsibilities for
recycling electrical products.
• Use the appliance only for food preparation. Only put food ingredients into the mixing
bowl. Never use it to store other materials or liquids.