dyras HSTR-028, Инструкция по эксплуатации

Страница: 10 / 61

HSTR-028
10
pOweR SUpply
The appliance must only be connected to mains electricity of 230V and
50Hz. Always ensure the mains voltage where you’re using the appliance
corresponds to the value shown on the nameplate of the appliance.
USINg Of applIaNCe
Before use
• Unpack the appliance and remove all the packing materials.
• Carefully check the appliance to ensure it is complete and undamaged. You should
only use the appliance if it is complete and has not suffered any damage.
The use of the hair styling appliance
1. Connect the hair styling appliance to the mains. After turning the appliance on the
lamp indicating the heating (2) will light up. After that be careful to hold the handle
only and not touch the ceramic styling plates.
2. After the appliance has been connected to the mains the temperature of the styling
plates will increase in a few minutes to a level where hair styling can begin.
warning! If you need to put the appliance down for a moment
when using it, always place it on a heat-resistant surface and
make sure there is no flammable material nearby. pay attention
to where you place the appliance and never leave it unattended
during use.
3. When you have finished styling unplug the appliance from the mains. Put the hair
styling appliance on a heat resistant surface until it cools down completely. Avoid