dyras HDM-202, Инструкция по эксплуатации

Страница: 7 / 31

EN
HDM-202 HDM-202
12
13
not use cleaning agents with coarse or grinding effect.
3. Never remove the casing or dismantle the iron.
4. Remove the dough or beater attachments from the unit and wash them thoroughly with
warm water and washing up liquid, or put them in the dishwasher. Afterwards, rinse and dry
thoroughly.
5. If the appliance will not be used for a longer time, after cleaning put it in a nylon bag and
store it in a dust, humidity and frost free storage place. Do not wind the power cord around
the appliance not even for storage, because bending could break or weaken the insulation of
the power cord.
6. The hand mixer is factory lubricated and does not require any additional lubrication. No
other maintenance apart from cleaning is necessary. Repair, if necessary must only be
performed by a specialist service centre.
QUALITY CERTIFICATION
We hereby certify that the dyras HDM-202 type hand mixer complies with the technical
parameters listed below:
Type: HDM-202
Description: Hand mixer
Nominal voltage: 220-240 V~ 50 Hz
Power: 200 W
Blocked motor power: 500 W
Shock protection class: Class II
Noise emission:
L
WA
= 86 dB
Operating time: intermittent use (20 minutes pause after max. 4 minutes operation)
Manufacturer: The Global Electric Factory Inc.
We are continuously developing our products to keep them up-to-date, which means the technical data of our appliances may
change without any prior notice. Errors and omissions excepted.
COPYRIGHT
© Copyright The dyras wwe.factory LLC, U.S.A.
All rights - including distribution by film, radio or television, translation, photographic or audio
copying, abstract reprint and other duplication - are specifically reserved. Any breach may result
in legal action.
THE CE SYMBOL
This appliance meets the requirements for safety and electromagnetic compatibility (EMC). The
relevant ‘CE’ mark can be found on the nameplate, on the packing box and in the instruction
manual.