dyras ESI-2400AC, Инструкция по эксплуатации

Страница: 5 / 77

EN
ESI-2400AC
5
Dear Customer,
All electrical and mechanical equipment needs to be cared for appropriately. It’s important
to note that using or storing the appliance in certain conditions may adversely affect its lifespan
and functionality. Always protect the appliance from the conditions listed below.
Using or storing the appliance in a wet, humid or damp environment can cause:
- deterioration and premature aging of the cover and electric insulation of the appliance,
- premature wearing and aging of the plastic and rubber components,
- rust and corrosion affecting electrical components and metal parts.
Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated
with vapors from cooking oil or grease) can cause:
- greasy dust coatings on the mechanical and electrical elements and the casing of the appliance,
which could result in electrical contact failure or even complete breakdown, and could also
damage the plastic and rubber elements,
- dirt on the soleplate, which will burn onto the soleplate and the fabric being ironed,
- unpleasant odours developing during use.
Direct sunshine can cause:
- premature aging of the appliance,
- deterioration of the plastic and rubber parts, resulting in a risk to the user’s safety.
Storing the appliance in a frosty or cold environment can cause:
- plastic and rubber parts to become fragile, resulting in a risk to the user’s safety,
- rust and corrosion affecting electrical components and metal parts.
Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:
- damage, deformation, softening or melting of plastic and rubber parts,
- deterioration of electrical insulation, resulting in a risk to the user’s safety.
Continuous heavy use can cause:
- premature wear to the body of the iron,
- corrosion and scale that blocks the steam nozzles, particularly in a ‘hard water’ area,
- the spray and steam buttons to fail or become worn,
- electrical components to wear out or overheat,
- deterioration due to the effects of frequent heating.
following the operating instructions and avoiding any of the conditions listed above will help you
increase the lifespan of the appliance. the manufacturer is not responsible if the appliance is stored
inappropriately or contrary to these instructions. you are recommended to have the appliance
serviced regularly by an authorised engineer to keep it working for as long as possible.
5
EN