I25-028 www.powercommander.com
2016 Ski-Doo 1200 PCV - 4
4
Using the supplied velcro, secure the PCV to the side of the battery as shown
in Figure D.
Make sure to clean both surfaces with the alcohol swab before attaching.
5
Route the PCV wiring harness along side the main harness up from the battery
and over the cylinder head as shown in Figure E.
6
Using the supplied zip ties, secure the PCV harness to the factory harness.
7
Locate the throttle body servo motor connector on
the left side of the snowmobile as shown in
Figure F.
8
Using the supplied posi-tap, attach the black/white
wire from the PCV harness to the beige/grey (top
left wire) on the stock connector.
9
Using the supplied posi-tap, attach the grey wire
from the PCV harness to the beige/white (bottom
left wire) on the stock connector.
FIG.D
FIG.F
FIG.E
blk/wht
grey
