8
STEP 3 -
Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs
Note
: If you plan to use a 5° tilt with a larger TV (42”+), we suggest using spacers with the mounting
brackets so that the bottom of the TV does not touch the wall.
1
Align the left and right TV brackets (
B
and
C
) with the screw holes on the back of the TV. Make sure that
the brackets are level.
2
Place spacers (
I
or
R
) behind the TV brackets. If you are using M4/M5
washers (
G
), place them between
the spacers and TV brackets and over the holes in the TV brackets. If you are using M6/M8 washers (
H
),
place them over the holes in the TV brackets. Insert screws (
F, K, N, P,
or
Q
) through the washers, TV
brackets, and spacers.
3
Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
or
or
I
R
or
K N
P Q
or
G
(8)
F
(4)
Phillips screwdriver
Screws
Washers
Spacers
I
(4)
B
and
C
TV
brackets
H
(4)
K
(4)
or
or
or
R
(4)
Level
N
(4)
or
P
(4)
Q
(4)
or
DX-DRTVM114_13-0670_MAN_V1_ENG.fm Page 8 Monday, July 22, 2013 10:26 AM
